250psi UL FM Fire Hydrant with Mechanical Connector

• Customization: Available
• Type: Outdoor Fire Hydrant
• Decompression: Vacuum Regulator Bolt
• Model NO.: MH-1510A
• Rotation: Ordinary Bolt
• Outdoor Fire Hydrant Type: High-Pressure Fire Hydrant
• Product Name: UL FM Dry Barrel Fire Hydrant with Flange Connecto
• Design Standard: Awwa C502
• Working Pressure: 250psi
• Shell Test Pressure: 500psi
• Seal Test Pressure: 500psi
• Connection: Flange
• Material of Body: Ductile Iron
• Opertion Nut Material: C95400
• Certificate: UL,FM
• Flow Media: Water
• Transport Package: Export Standard Wooden Case
• Specification: 6"
• Trademark: APC
• Origin: China
• HS Code: 8481809000
• Production Capacity: 10000000

Product Description

UL FM Dry Barrel Fire Hydrant with Flange connector


Model No.:MH-1510FA/MH-1510A
Technical Specifications:

1. Design Standard:AWWA C502
2. Nominal Pressure:17.2 bar(250PSI)
3. One pumper nozzle:4.5-4NH thread .Two hose nozzles,2.5-7.5NH threads.

   Other kinds of threads are available

1. Mechnical connector:AWWA/ANSI C153/A21.53  6", Model No.:MH-1510A
2. Flange connector:ASME B16.5 CLASS 150/DIND2501 PN16 Model No.:MH-1510FA
3. Main Valve sizes : 133.4 mm / 5-1/4"
4. Finish : Red epoxy paint & Bitumen Black
5. Note : Each hydrant is supplied with a hydrant wrench.
6. UL 246 Listed,FM 1510 Approved

 

40	Bolt	2	SS304	ASTM A240
39	Screw stem bushing	1	SS304	ASTM A240
38	100 Cover gasket	1	EPDM	ASTM D2000,EPDM
37	100 Connector	1	C95400	ASTM B148
36	Check turn gasket	1	Gr.B	ASTM A283-B
35	Locking nut gasket	1	DI	ASTM A536 Grade 65-45-12
34	Platen	1	DI	ASTM A536 Grade 65-45-12
33	Annular tubes	1	1045	ASTM A29\29M
32	Bolt,Nut	6	1035	ASTM A29\29M
31	Seat fixing plate	1	DI	ASTM A536 Grade 65-45-12
30	Bolt,Nut	2	SS304	ASTM A240
29	Seat	1	C95400	ASTM B148
28	Drain hole cover	1	C95400+EPDM	ASTM B148+ASTM D2000,EPDM
27	Cushipn rubber	1	EPDM	ASTM D2000,EPDM
26	Screw stem	1	1045	ASTM A29\29M
25	Bolt,Nut	8	1035	ASTM A29\29M
24	Cover chain	3	Gr.B	ASTM A283-B
23	Cylindrical pin	1	1045	ASTM A29\29M
22	100 cover	1	DI	ASTM A536 Grade 65-45-12
21	Bolt,Nut	8	1035	ASTM A29\29M
20	Screw nut seat	1	C95400	ASTM B148
19	Screw nut gasket	1	C95400	ASTM B148
18	Screw stem nut	1	C95400	ASTM B148
17	Thread plug	1	C95400	ASTM B148
16	Upper end cover	1	DI	ASTM A536 Grade 65-45-12
15	65 Cover	2	DI	ASTM A536 Grade 65-45-12
14	65 Cover gasket	2	EPDM	ASTM D2000,EPDM
13	65 Connector	2	C95400	ASTM B148
12	Main body on ground	1	DI	ASTM A536 Grade 65-45-12
11	Clamp for connection tube	1	DI	ASTM A536 Grade 65-45-12
10	Connecting rod sleeve	1	1045	ASTM A29\29M
09	Perforated cylindrical pin	2	1045	ASTM A29\29M
08	Connecting cylinder	1	DI	ASTM A536 Grade 65-45-12
07	Drain hole spring	2	SS316	ASTM A240
06	Sealed rubber sheet	1	EPDM	ASTM D2000,EPDM
05	Tray	1	DI	ASTM A536 Grade 65-45-12
04	Locking nut gasket	1	EPDM	ASTM D2000,EPDM
03	Connecting rod	1	1045	ASTM A29\29M
02	Locking nut gasket	1	DI	ASTM A536 Grade 65-45-12
01	Flange connector or Mechnical connector	1	DI	ASTM A536 Grade 65-45-12
Part No.	Part Name	Qty.Req'd	Material	Specification

Model Number	Dimension mm(mm/inch)				Weight(kg)
	A(mm/inch)	B(mm/inch)	C(mm/inch)	D(mm/inch/feet)
MH-1510FA MH-1510A	208/8.2	805/31.7	460/18.1	911/36/3	178
				1063/42/3'6"	185
				1215/48/4'	190
				1368/54/4'6"	196
				1520/60/5'	211
				1673/66/5'6"	220
				1825/72/6'	241
				1978/78/6'6"	246
				2130/84/7'	251

Fire Hydrant
Model No.:MH-1510FA/MH-1510A                Installation, operation & maintenance
Installation
1. Hydrants should be handled with care to avoid damage.  It is recommended to keep hydrants closed until use.
2. If the hydrant is not to be used straight away then it is recommended to coat threads and other machined parts with
an anti-rust oil and the hydrant should be stored in a dry and ventilated area.  For long-term storage, the hydrant should be checked regularly.
3. Before installation of hydrants, the connection should be free from dirt or other matter.
4. The positioning of the hydrant should be in accordance with local requirements.  Ideally the pumper should face the
street and all connections should be away from any obstruction to connecting hoses.
5. The inlet elbow should be placed on a solid surface and if possible brace the side opposite the incoming flow to
reduce reaction stresses.
6. The underground parts of the hydrant should be surrounded with coarse gravel for support and drainage.
7. After the hydrant has been installed and tested, it is recommended to fully flush the hydrant before closing for ser-vice. Before replacing the nozzle caps, it is recommended to check for correct drainage of the hydrant on closing of the valve.  This can be achieved by placing a hand over the nozzle opening, a suction should be felt.




Operation
1. Unscrew the nozzle caps and connect hoses.
2. Open the hydrant using the hydrant key (included) to the fully open position by turning the valve nut in an
anti-clockwise direction - do not force the hydrant to open further past the fully open position.  Note that the hydrant valve is not intended to control the flow, it should be used in either the fully open or fully closed position.
To control flow, a pressure/flow control valve should be fitted to the nozzle outlets on the hydrant.
3. To close, turn the valve nut in a clockwise direction - again, do not over tighten.

   Maintenance
1. Carry out a visual inspection for signs of significant corrosion which may impair performance.
2. Where possible, carry out leak tests by opening one of the nozzle caps slightly and then opening the hydrant valve.
Once the air has escaped tighten the hose cap and check for leaks.
3. Close hydrant and remove one nozzle cap so that the drainage can be checked.
4. Flush the hydrant.
5. Clean and lubricate all nozzle threads.
6. Clean the exterior of the hydrant and repaint if required.